Skip to main content

SKU: #980-9I948-00N000

NVIDIA COMPATIBLE ACC SPLITTER IB TWIN PORT NDR 800Gb/s TO 2x400Gb/s OSFP TO 2xOSFP 4 & 5 METER ACTIVE COPPER SPLITTER CABLES

Application: 800G NDR Switch to 400G NDR HCA

(No reviews yet) Write a Review
$1,260.00 - $1,340.00
Adding to cart… The item has been added

Share on Social Media:

1-Year Warranty
30-Day Exchange
30-Day Returns

Equivalent Mellanox Part-Number:

MCA7J60-N004 (4 Meter)

MCA7J60-N005 (5 Meter)

The NVIDIA 980-9I948-00Nxxx compatible Active Copper Cables (ACC) is an 800Gb/s twin-port OSFP (Octal Small Formfactor Pluggable) to 2x400Gb/s OSFP passive Active Copper Cable (ACC) dual breakout (aka splitter) cable.

The ACC uses 8-channels of 100G-PAM4 modulation and has lengths of 4 and 5-meters. It has identical design and internals as the QSFP112 version, only with different connector shells. The ACC firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to.

The 8-channel, twin-port, OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 100G-PAM4 (400G) use a flat top OSFP for use in ConnectX-7 adapters using riding heat sinks on the connector cage. For use in liquid-cooled systems, a twin-port OSFP version is available with a flat top (designated -FLT in the part number).

ACC cables are the second lowest-cost, low-latency, low-power consuming, high-speed links next to passive DACs due to their simplicity of design and minimal components. The “active” term refers to the passive copper cable with an equalizer integrated circuit to extend the length to 4 and 5-meters while maintaining lowlatency and low-power at 1.5 Watts and 0.6 Watts. Thin 30AWG is used for 4m lengths and thicker 26AWG for 5m. Each end includes an EEPROM which provides product identification and characteristics to the host system. Main use is linking an 800Gb/s Quantum-2 switch or Spectrum-4 switch to OSFP-based 400Gb/s ConnectX-7 PCIe network adapter cards.

Key Features:

  • Up to 800Gb/s split to two 400Gb/s data rates
  • Based on 100G-PAM4 modulation
  • OSFP switch end 1.5 Watts
  • Single port OSFP ends 0.6 Watts
  • 4 and 5-meter lengths
  • Operating case temperature 0-70°C
  • Single 3.3V supply voltage
  • Hot pluggable
  • LSZH (Low Smoke Zero Halogen) jacket

Application: Quantum-2 InfiniBand or Spectrum-4 Ethernet switch-to-two 400Gb/s ConnectX-7 OSFP adapters